Can the addition of surfactants to NaOCl irrigation impact on the percentage of voids of root canal filling?

This study evaluated the impact of canal irrigation using surfactants associated to NaOCl on the percentage of voids of root canal filling through micro-computed tomographic (micro-CT) analysis. 27 mandibular mesial roots with Vertucci type II canal configuration with isthmus were selected and scanned in a micro-CT device. The specimens were assigned to three groups (n = 9), according to the irrigation solution during instrumentation: 2.5% NaOCl without additives (control), 2.5% NaOCl with 0.1% Benzalkonium Chloride and 2.5% NaOCl with 0.1% Tween 80. After obturation, the specimens were rescanned, and the percentage of voids were calculated. Data were analysed using one-way ANOVA with a significance level of 5%. The percentage of voids were similar among the groups (p > 0.05). None of the specimens showed completely voids-free areas. The addition of surfactants to NaOCl irrigation did not improve the quality of root canal filling of mandibular mesial root canals.

Disinfectant effectiveness of chlorhexidine gel compared to sodium hypochlorite: a systematic review with meta-analysis.

This study aimed to compare the disinfectant ability of chlorhexidine (CHX) gel and sodium hypochlorite (NaOCl). Systematic searches were conducted from inception until December 8th, 2022 (MEDLINE/PubMed, Cochrane Library, Web of Science, Scopus, Embase, and Grey Literature databases). Only randomized clinical trials were included. The revised Cochrane risk of bias tools for randomized trials were used to assess the quality of studies. Meta-analyses were performed. The overall quality of evidence was assessed through the Grading of Recommendations Assessment, Development, and Evaluation tool. Six studies were included. Five had a low risk of bias and 1 had some concerns. Three studies assessed bacterial reduction. Two were included in the meta-analysis for bacterial reduction (mean difference, 75.03 [confidence interval, CI, -271.15, 421.22], p = 0.67; I2 = 74%); and 3 in the meta-analysis for cultivable bacteria after chemomechanical preparation (odds ratio, 1.03 [CI, 0.20, 5.31], P = 0.98; I2 = 49%). Five studies assessed endotoxin reduction. Three were included in a meta-analysis (mean difference, 20.59 [CI, -36.41, 77.59], p = 0.48; I2 = 74%). There seems to be no difference in the disinfectant ability of CHX gel and NaOCl, but further research is necessary.

Effect of the progressive taper enlargement of buccal root canals of three-rooted maxillary molars: A stepwise micro-CT study.

This study evaluated unprepared canal areas, volume of dentine removal, and dentine thickness after the progressive enlargement of the buccal canals of 22 maxillary molars, with and without the MB2, using instruments with the same tip size (0.25 mm) but 4 different tapers (0.03, 0.05, 0.06 and 0.08 v). Micro-CT scans were performed after each instrument. Data were compared using a general linear mixed model post hoc comparisons with Kenward-Roger for Wald F tests (α = 5%). After each treatment step, it was observed an increase in the percentage volume of removed dentine and a decrease in the unprepared areas and dentine thickness at the pericervical region of all canals (p < 0.05). The percentage reduction of dentine thickness in MB2 canal was higher than in the mesiobuccal and distobuccal canals (p < 0.05). Knowledge of pre-operative dimensions and dentine thickness before enlargement of buccal canals of maxillary molars is an important factor to avoid excessive dentine removal.

Mechanical activation with Easy Clean device enhanced organic tissue removal from simulated internal root resorption in a laboratory evaluation.

BACKGROUND: Considering the irregular shape of the root canal, removing inflamed pulp and granulation tissue completely from internal resorption cavities during chemomechanical preparation can be challenging. This study aimed to evaluate the effectiveness of passive ultrasonic irrigation (PUI) compared to mechanical activation with Easy Clean in the removal of organic tissue from simulated areas of internal root resorption. METHODS: The root canals of 72 extracted single-rooted teeth with oval canals were instrumented with Reciproc R25 instruments. After root canal preparations, the specimens were split longitudinally, and semicircular cavities were prepared using a round bur on each half of the roots. Samples obtained from bovine muscle tissue were weighed and adapted into semicircular cavities. The roots were reassembled and joined, and the teeth were divided into six groups (n = 12) according to the irrigation protocol: Sodium hypochlorite (NaOCl) without activation; NaOCl + PUI; NaOCl + Easy Clean; distilled water without activation; distilled water + PUI; and distilled water + Easy Clean. After irrigation protocols, the teeth were disassembled, and the remaining organic tissue was weighed. Data were analyzed by two-way ANOVA and Tukey's post hoc test (p < 0.05). RESULTS: None of the experimental protocols totally removed the bovine tissue from simulated cavities. Tissue weight reduction was significantly affected by the activation method (p < 0.05) and by irrigation solution (p < 0.05). Groups with NaOCl irrigation presented higher tissue weight loss when compared to distilled water, for all irrigation methods (p < 0.05). The use of Easy Clean resulted in the greatest tissue weight loss (42.0%-Distilled water/45.5%- NaOCl) compared to those of PUI (33.3%-Distilled water/37.7%- NaOCl) and no activation (33.4%-Distilled water/38.8%- NaOCl) (p < 0.05). However, no differences were observed between PUI and no activation groups (p > 0.05). CONCLUSIONS: Mechanical activation with Easy Clean enhanced organic tissue removal from simulated internal resorption more effectively than PUI. Easy Clean for agitation of the irrigating solution is effective in removing simulated organic tissues from artificial internal resorption cavities, being an alternative to the use of PUI.

Marginal gaps and voids of three root-end filling materials: A microcomputed tomographic study.

A root-end filling material is required to fill the root-end cavity without gaps or voids, to prevent root canal reinfection and to provide periapical healing. Thus, this study evaluated the volume of marginal gaps and voids of three root-end filling materials using microcomputed tomography (micro-CT). Thirty maxillary incisors were prepared and filled with gutta-percha and endodontic sealer. The specimens were scanned using micro-CT and distributed into three groups (n = 10): White MTA, MTA Repair HP, and Bio-C Repair. The root tips were resected at 90° to the longitudinal axis and the cavity (3 mm depth) was prepared with an ultrasonic tip. The materials were handled, and the cavities were filled. The specimens were rescanned and the percentual volume of gaps and voids were analyzed. The data were analyzed using Kruskal-Wallis and Dunn tests (p < .05). No statistical difference was found in the percentage of gaps among the tested materials (p > .05). White MTA presented less voids than Bio-C and MTA Repair HP (p < .05). The materials presented a similar percentual volume of gaps and White MTA presented less voids than other tested materials.

Shaping ability and apical debris extrusion after root canal preparation with rotary or reciprocating instruments: a micro-CT study.

OBJECTIVES: The aim of this study was to evaluate the shaping ability of the TruShape and Reciproc Blue systems and the apical extrusion of debris after root canal instrumentation. The ProTaper Universal system was used as a reference for comparison. MATERIALS AND METHODS: Thirty-three mandibular premolars with a single canal were scanned using micro-computed tomography and were matched into 3 groups (n = 11) according to the instrumentation system: TruShape, Reciproc Blue and ProTaper Universal. The teeth were accessed and mounted in an apparatus with agarose gel, which simulated apical resistance provided by the periapical tissue and enabled the collection of apically extruded debris. During root canal preparation, 2.5% sodium hypochlorite was used as an irrigant. The samples were scanned again after instrumentation. The percentage of unprepared area, removed dentin, and volume of apically extruded debris were analyzed. The data were analyzed using 1-way analysis of variance and the Tukey test for multiple comparisons at a 5% significance level. RESULTS: No significant differences in the percentage of unprepared area were observed among the systems (p > 0.05). ProTaper Universal presented a higher percentage of dentin removal than the TruShape and Reciproc Blue systems (p < 0.05). The systems produced similar volumes of apically extruded debris (p > 0.05). CONCLUSIONS: All systems caused apically extruded debris, without any significant differences among them. TruShape, Reciproc Blue, and ProTaper Universal presented similar percentages of unprepared area after root canal instrumentation; however, ProTaper Universal was associated with higher dentin removal than the other systems.

The ability of reciprocating glide path instruments to reach the full root canal working length.

This study evaluated the ability of reciprocating glide path instruments to reach the full working length (RFWL). Thirty mesial roots of mandibular molars were matched into 2 groups (n = 15 teeth, 30 root canals), according to the system used for glide path: WaveOne Gold Glider (WOGG) and R-Pilot. The samples with fractured instruments or when it was not possible to RFWL were scanned using micro-computed tomography. Fractured instruments were also visualised through a scanning electron microscopy to verify the type of fracture. The parameters were compared statistically by Fisher's and chi-square tests (P < 0.05). No instrument fractures were observed in the R-pilot, while 2 fractures occurred in the WOGG group (P > 0.05). RFLW was achieved in 29 canals (96.66%) and 28 canals (93.33%) with R-pilot and WOGG instruments, respectively (P > 0.05). The instruments are able to RFWL in mesial canals of mandibular molars. WOGG showed two fractures while no R-Pilot instruments fractured.

Root groove depth and inter-orifice canal distance as anatomical predictive factors for danger zone in the mesial root of mandibular first molars.

OBJECTIVES: This study evaluated the danger zone (DZ) in mesial roots of mandibular molars and the correlation between anatomical references of the DZ and some anatomical landmarks including tooth/root length, depth of mesial and distal grooves, and inter-canal orifices distance. MATERIAL AND METHODS: Twenty-eight mesial roots of mandibular molars with 2 independent canals were scanned and divided into 2 groups according to root length. The anatomical landmarks were correlated (Pearson or Spearman coefficients) with root level, thickness, and position of the DZ and also compared (independent samples t or Mann-Whitney tests) between the 2 groups at α = 5%. RESULTS: No statistical difference was observed between groups regarding DZ parameters and depth of mesial and distal grooves (P > 0.05). Orifice distance in group 2 (4.49 ± 0.75 mm) was significantly greater than group 1 (3.76 ± 0.89 mm) (P < 0.05). Significant correlations (P < 0.05) were found between (i) DZ level and root/tooth length (r = 0.54 and 0.49, respectively), (ii) DZ thickness and distal groove depth (r = - 0.45), and orifice distance (r = 0.38), and (iii) DZ position and depth of mesial (r = 0.39) and distal (r = 0.40) grooves. Other variables such as root length and distal groove depth (r = 0.28), and orifice distance and mesial groove depth (r = 0.36) were also correlated (P < 0.05). CONCLUSIONS: The length of tooth/root, the distance of canal orifices, and the depth of mesial/distal grooves of mesial roots of mandibular molars might be predictive factors for the root level, position, and thickness of the DZ. CLINICAL RELEVANCE: The length, distance of mesial canal orifices, and the depth of mesial and distal grooves of the mesial roots of mandibular molars might be moderate predictive factors for the root level, position, and thickness of the DZ.

C-shaped canals in mandibular molars of a Brazilian subpopulation: prevalence and root canal configuration using cone-beam computed tomography.

OBJECTIVES: To assess C-shaped root canal configuration by identifying its prevalence and each configuration type proportion, according to tooth (mandibular first or second molar) and demographic characteristics in a Brazilian population, using cone-beam computed tomography (CBCT). Moreover, it was verified if there is a relationship between root canal configuration observed in two-dimensional reconstructions of CBCT and presence of C-shape. METHODS: Mandibular jaw CBCT scans (184 males and 220 females, aged 15 to 80 years), which presented 1464 mandibular molars (710 first molars and 754 second molars), were assessed. Teeth were evaluated for the presence and type of C-shaped root canals by observing the roots at five levels in CBCT axial reconstructions. Root canal configuration was assessed in panoramic reconstructions. Data were statistically analyzed at a significance level of 5%. RESULTS: Of the 1464 mandibular molars, 125 (8.5%) were classified as C-shaped. This variation was more prevalent in females (n = 107, 85.6%) and in second molars (n = 108, 86.4%). C1 (uninterrupted C-shaped canal) was the most prevalent type of C-shaped configuration (41.76%), while C5 (no canal lumen) was the least prevalent type (0.96%). Single root with single canal in panoramic reconstructions was the most predominant configuration for C-shaped teeth (n = 54, 43.2%). Fused roots presented 17.2 higher odds of being associated with C-shaped root canals than non-fused roots. CONCLUSIONS: C-shaped root canals were more prevalent in mandibular second molars and in females. Additionally, clinicians should bear in mind the greater possibility of C-shaped configuration in mandibular molars with fused roots. CLINICAL RELEVANCE: Mandibular molars with C-shaped canals present a clinical challenge. A higher C-shaped proportion was noted in radiographic fused root types, which had 17.2 higher odds of presenting such anatomy when compared to radiographic non-fused roots. Root radiographic features may help in diagnosis of complex C-shaped morphologies.

Cleaning Ability of Irrigants and Orange Oil Solvent Combination in the Removal of Root Canal Filling Materials.

OBJECTIVE: This study investigated the influence of different irrigants and the use of orange oil solvent in the removal of filling materials during root canal retreatment. METHODS: Forty maxillary premolars were shaped using the ProTaper System up to file F3 (size 30, 0.09 taper) and filled by Tagger's hybrid technique using the AH Plus. Samples were randomly assigned to four groups (n=10) according to the irrigating protocol during endodontic retreatment with the ProTaper Universal Re-treatment System: G1, 2% chlorhexidine (CHX) gel; G2, 2% CHX gel with an orange oil solvent; G3, 5% sodium hypochlorite (NaOCl); and G4, 5% NaOCl with an orange oil solvent. Afterwards, the samples were longitu-dinally split into two halves, and the root wall images were prepared by scanning electron microscopy. Two pre-calibrated evaluators analyzed the images using a filling materials remnants score system. Data were statistically analyzed using the Kruskal-Wallis and Dunn's tests (p<0.05). RESULTS: All samples had residual filling materials in the root canal walls after instrumentation. According to the presence of the filling material remnants in the total area of samples, the groups were ranked in the follow-ing order: G2=G4>G1=G3. No statistical differences were found when the CHX and NaOCl were used (p>0.05). Groups in which a solvent was used showed a less effective cleaning ability (p<0.05). The use of NaOCl with solvent presented the highest amounts of filling materials remnants in the critical apical area (p<0.05). CONCLUSION: The use of orange oil with NaOCl or CHX does not improve the removal of residual root canal filling materials.

Maxillary first molar with 7 root canals diagnosed using cone-beam computed tomography.

Root canal anatomy is complex, and the recognition of anatomic variations could be a challenge for clinicians. This case report describes the importance of cone beam computed tomographyic (CBCT) imaging during endodontic treatment. A 23 year old woman was referred by her general dental practitioner with the chief complaint of spontaneous pain in her right posterior maxilla. From the clinical and radiographic findings, a diagnosis of symptomatic irreversible pulpitis was made and endodontic treatment was suggested to the patient. The patient underwent CBCT examination, and CBCT scan slices revealed seven canals: three mesiobuccal (MB1, MB2, and MB3), two distobuccal (DB1 and DB2), and two palatal (P1 and P2). Canals were successfully treated with reciprocating files and filled using single-cone filling technique. Precise knowledge of root canal morphology and its variation is important during root canal treatment. CBCT examination is an excellent tool for identifying and managing these complex root canal systems.

Cytocompatibility of calcium silicate-based sealers in a three-dimensional cell culture model.

OBJECTIVES: The aim of the present study was to evaluate cytotoxic effects and cytokine production of calcium silicate-based sealers (EndoSeal, EndoSequence BC Sealer, and MTA Fillapex) using an in vitro root canal filling model and three-dimensional (3D) cell culture. AH Plus as a reference was compared to contemporary calcium silicate cements regarding cell viability and cytokine production. MATERIAL AND METHODS: Root canals of 30 human maxillary incisors were prepared using a single-file reciprocating technique. The samples were randomly distributed and canals filled with either AH Plus, EndoSeal, EndoSequence BC Sealer, and MTA Fillapex (n = 6). In the negative control group, the root canal remained unfilled. Sealers were placed into the canals along with a gutta-percha cone placed to working length. Balb/c 3T3 fibroblasts, cultured in a type I collagen 3D scaffold, were exposed to filling material and the respective root apex for 24 h. Cytocompatibility of the materials was evaluated using the methyl-thiazoldiphenyl-tetrazolium (MTT) assay. The production of IL-1ß, IL-6, and IL-8 was analyzed using enzyme-linked immunosorbent assay (ELISA). One-way analysis of variance was performed, and when the F-ratios were significant, data were compared by Duncan's multiple-range test. The alpha-type error was set at 0.05. RESULTS: EndoSeal, Endosequence BC Sealer and AH Plus showed cell viability that was similar to the negative control group (P > 0.05), while MTA Fillapex sealer was cytotoxic (P < 0.05). Varying production of IL-1ß, IL-6, and IL-8 was detected in all samples. CONCLUSIONS: In an in vitro root canal filling model with 3D cell culture, AH Plus, EndoSeal, and EndoSequence BC Sealer were cytocompatible. CLINICAL RELEVANCE: These results may suggest that AH Plus, EndoSeal and EndoSequence BC Sealer may achieve better biological response when compared to MTA Fillapex.

Assessing pulp stones by cone-beam computed tomography.

OBJECTIVES: The aim of this study was to evaluate the occurrence of pulp stones by cone-beam computed tomography (CBCT) and to correlate their prevalence with patient's gender, location of tooth (right or left of maxillary or mandibular arch), group of teeth, and restorations. MATERIALS AND METHODS: CBCT images of 382 patients randomly selected from the database of the University Oral Radiology Department were retrospectively examined. A total of 2833 tooth images obtained using the i-CAT 3D Imaging System were evaluated. Image analysis was performed with the i-CAT software, and all teeth were evaluated in sagittal, axial, and coronal views. All the measurements were subjected to chi square test, odds ratio, and Fisher's exact tests (p < 0.05). RESULTS: The prevalence of pulp stones was similar between patient's genders and tooth locations. Pulp stones were detected in 31.9% of patients and 9.5% of teeth. Maxillary and mandibular molars were the groups of teeth with the highest frequency of pulp stones. The presence of restorations increased the chance of occurrence of pulp stones by 2.1 times in all teeth examined (p < 0.0001) and by 4.7 times in maxillary teeth (p < 0.0001). CONCLUSIONS: Pulp stones had a high prevalence with molar teeth showing the highest prevalence. The presence of restorations increased the chance of occurrence of these calcifications, specifically in maxillary teeth. CLINICAL RELEVANCE: CBCT provides accurate anatomical details in three dimensions, offering the possibility to view an individual tooth in axial, sagittal, and coronal views. This study performed an investigation of the occurrence of pulp stones by CBCT.

Evaluation of root canal configuration of maxillary and mandibular anterior teeth using cone beam computed tomography: An in-vivo study.

OBJECTIVE: Several studies demonstrate variability of root canal morphology of anterior teeth. This in-vivo study was designed to analyze and characterize root canal morphology of maxillary and mandibular anterior teeth using three-dimensional imaging. METHOD AND MATERIALS: Patients who required CBCT radiographic examinations as part of their routine examination, diagnosis, and treatment planning were enrolled on the study. A total of 1,200 healthy, untreated, fully developed maxillary and mandibular incisors and canines were included. The following observations were recorded: (i) number of roots and their morphology; (ii) number of canals per root; and (iii) primary variations in the morphology of the root canal systems. RESULTS: Root canal morphology of maxillary teeth was consistent with a single canal extending from the pulp chamber to the apex in 98% of the cases. In contrast, in mandibular central and lateral incisors, the presence of a single canal represented 64.5% and 60.5% respectively. The second most common morphology was the presence of one canal leaving the pulp chamber, which divided into two within the root, and then merged to exit as one canal in 18% and 25.5% respectively. The presence of one canal leaving the pulp chamber and dividing short of the apex into two separate and distinct canals with separate apical foramina (variant 5) was recorded in 14.5% and 12% respectively. CONCLUSION: There was a low incidence of anatomical variation in maxillary anterior teeth. In contrast, mandibular anterior teeth presented with a high prevalence of two canals, especially central and lateral incisors. The reported data may help clinicians understand the variations in root canal morphology of anterior teeth in order to overcome problems associated with shaping and cleaning procedures.

Postoperative pain after foraminal instrumentation with a reciprocating system and different irrigating solutions.

The aim of the present study was to evaluate and compare postoperative pain after foraminal instrumentation using 5.25% sodium hypochlorite (NaOCl) or 2% chlorhexidine (CHX) gel irrigation protocol in nonvital single-rooted teeth after reciprocating instrumentation. Sixty-two volunteers presenting a single root canal diagnosed with asymptomatic necrosis and apical periodontitis were randomized into 2 experimental groups regarding the irrigation protocol (ie, 5.25% NaOCl and 2% CHX gel groups). Endodontic treatment was performed in a single session under reciprocating instrumentation with foraminal instrumentation. Volunteers were instructed to record pain intensity. Scores from 1 to 4 were attributed to each kind of pain after 24, 48, and 72 h. Kolmogorov-Smirnov and Student´s t tests were used to determine significant differences at p<0.05. On average, the percentage of patients that had no or mild pain after 24, 48 or 72 h was 77.4%, 88.7% and 95.1%, respectively. No statistically significant age difference was found between the groups (p>0.05, Student´s t test). Postoperative pain showed no statistically significant difference at any observation period when using 5.25% NaOCl or 2% CHX gel (p>0.05). Moreover, no significant difference was observed in the mean number of analgesic tablets used between the groups (p>0.05). In conclusion, the use of 5.25% NaOCl or 2% CHX gel resulted in the same postoperative pain. Therefore, it can be inferred that irrigant choice has no relation with short-term follow up regarding postoperative pain.

Push-out bond strength of a self-adhesive resin cement used as endodontic sealer.

OBJECTIVES: The aim of the present study was to investigate the bond strength of RelyX Unicem (3M) to root canal dentin when used as an endodontic sealer. MATERIALS AND METHODS: Samples of 24 single-rooted teeth were prepared with Gates Glidden drills and K3 files. After that, the roots were randomly assigned to three experimental groups (n = 8) according to the filling material, (1) AH Plus (Dentsply De Trey GmbH)/Gutta-Percha cone; (2) Epiphany SE (Pentron)/Resilon cone; (3) RelyX Unicem/Gutta-Percha cone. All roots were filled using a single cone technique associated to vertical condensation. After the filling procedures, each tooth was prepared for a push-out bond strenght test by cutting 1 mm-thick root slices. Loading was performed on a universal testing machine at a speed of 0.5 mm/min. One-way analysis of variance and Tukey test for multiple comparisons were used to compare the results among the experimental groups. RESULTS: Epiphany SE/Resilon showed significantly lower push-out bond strength than both AH Plus/Gutta-Percha and RelyX Unicem/Gutta-Percha (p < 0.05). There was no significant difference in bond strength between AH Plus/Gutta-Percha and RelyX Unicem/Gutta-Percha (p > 0.05). CONCLUSIONS: Under the present in vitro conditions, bond strength to root dentin promoted by RelyX Unicem was similar to AH Plus. Epiphany SE/Resilon resulted in lower bond strength values when compared to both materials.

Surgical endodontic reintervention using a modern technique: 2 case reports.

Management of post-treatment apical periodontitis after surgery--assuming the tooth is restorable, periodontally sound, and the patient desires to retain it--includes nonsurgical retreatment and surgical reintervention. This article presents 2 cases of surgical reintervention using a modern surgery technique that utilized an operating microscope, ultrasonic tips, and biocompatible materials. After the reinterventions were performed, adequate periradicular healing was observed in both cases. These cases reinforce the precept that combining knowledge about the biologic aspects of endodontics with surgical endodontic treatment using a modern technique is a predictable treatment option.

Response of mice connective tissue to three different endodontic materials.

The aim of this study was to evaluate the biocompatibility of mineral trioxide aggregate (MTA) Bio and Portland cement (PC) and compare with those of ProRoot MTA. Polyethylene tubes were filled with materials and placed into dorsal subcutaneous connective tissue of Wistar albino rats. After 7, 30, and 60 days after the surgical procedure, the implants with the surrounding tissue were removed. Tissue samples were subjected to histological processing, and sections were stained with hematoxylin and eosin. Sections were evaluated for the intensity of inflammation, predominant cell type, presence of fibrous capsule and granulation tissue. Data were submitted to Kruskal-Wallis test at a significant level of P ≤ 0.05. No statistical differences were observed at any evaluated condition among tested materials (P > 0.05). Statistically significant differences were observed between mean inflammatory scores, cell types and granulation tissue of the same material in different experimental periods (P < 0.05). Can be concluded that biocompatibility of MTA bio and PC were comparable with that of ProRoot MTA.

Furcal-perforation repair with mineral trioxide aggregate: Two years follow-up.

Furcal perforations are significant iatrogenic complications of endodontic treatment and could lead to endodontic failure. Mineral trioxide aggregate (MTA) has been regarded as an ideal material for perforation repair, retrograde filling, pulp capping, and apexification. This case report describes a furcal perforation in a maxillary first molar, which was repaired using MTA. The tooth was endodontically treated and coronally restored with resin composite. After 2 years, the absence of periradicular radiolucent lesions, pain, and swelling along with functional tooth stability indicated a successful outcome of sealing the perforation using MTA.